1080 Usb Cable And Usb Board - Lenovo ThinkPad T495s Hardware Maintenance Manual

Removal steps of thermal fan assembly
When installing:
• Ensure that the connector is attached firmly.
• Do not press the top of the fan cover and the fan hub.
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
the part marked a as shown in the following illustrations. Either too much or too less application of grease
can cause a thermal problem due to imperfect contact with a component.

1080 USB cable and USB board

For access, remove these FRUs:
• "1020 Base cover assembly" on page 71
• "1070 Thermal fan assembly" on page 74
2c
2a
2b
2d
Chapter 8
.
Removing or replacing a FRU
75