Table of Contents
Advertisement
From the joint bracket, remove the two screws "C" |
retaining the capstan motor.
Wi Removing the Flywheel (See Fig 9.10)
P.C.Board.
2.Remove the capstan motor assembly.
3.After turning over the cassette mechanism, remove
the slit washers "a" and "b" fixing the capstan shafts
R and L, and pull out the flywheels R and L respectively
from behind the cassette mechanism.
Flywheel R
MX-J30/MX-J330/MX-J35R
Capstan motor
Joint
bracket
Flywheel L
Ste ald
1
Slit
washer "a"
Flywheel R
Flywheel L
1.Remove the five pawls (c,d,e,f,g) retaining
the reel pulse P.C.Board.
2.From the surface of the reel pulse P.C.Board parts,
remove the two pawils "h" and "i" retaining the solenoid.
Tey
i
Ss
washer "b"
f
9g
Solenoid
Solenoid
b
Reel pulse board
2-25
Advertisement
Table of Contents
