JVC MX-J30 Service Manual page 33

Compact component system

Hide thumbs Also See for MX-J30:

Table of Contents

< Rear Panel Assembly >

- Prior to performing the following procedure, remove the

metal cover and the CD changer mechanism assembly.

- The following procedure can be performed even if the

front panel assembly is attached.

m@ Removing the Rear Cover (See Fig.17)

1. Remove the two Q screws attaching the rear cover on the

back of the body.

@ Removing the Rear Panel (See Fig.17 to 20)

+ Prior to performing the following procedure, remove the

rear cover.

1. Remove the four R screws attaching the heat sink and

the rear panel.

2, Remove the eight S screws attaching the rear panel.

3. Remove the two T screws attaching the voltage selector

and the rear panel. (Only Ver.U type)

4. Release the two joints(d) and (e) on the lower part of the

rear panel using a screwdriver, and remove the rear

panel toward the rear side.

Joint(d)

Fig.19

MX-J30/MX-J330/MX-J35R

Rear panel

i PERUSE

Fig.18

Maou

Heat sink

2-13

Table of Contents

Mx-j330 Mx-j35r