Table of Contents
Advertisement
2.
NOMENCLATURE AND FUNCTIONS
Handling the FR-PUM1 Parameter Unk
The FR-PUO2.1 parameter unit can be connected to the inverler using an optional
cable.
Note: With the FR-PUO2.1, setting the inverter parameters. operating frequency, and running
operation for forward and reverse rotation can be done. However, monitoring (including
graphic) and other operations can be done only within a limited range.
If the FR-PUO2.1, is used and Pr.
37
(speed unit) is set to 100 or higher, a value that
ignores the third and above digits, and which also ignores the monitor display will be
applied. (Note that the set value is registered, so il the Pr.
37
s e t
value is read with the
FR-PUOS, a value that is set to 100 or higher will display.
- 7 -
Advertisement
Table of Contents
