10 SERVICE SCHEDULE
Perform major engine service (Change piston. Check/measure the cylinder.
Check the cylinder head. Change the valves, valve springs, and valve spring
seats. Check the camshaft and rocker arm. Change the connecting rod, conrod
bearing and crank pin. Change the radial shaft seal rings of the water pump.
Check the transmission and the shift mechanism. Check the oil pressure con-
trol valve. Change the suction pump. Check the force pump and lubrication
system. Change the timing chain. Check the timing assembly. Change all the
engine bearings.).
○
One-time interval
●
Periodic interval
46
after every race
Every 100 operating hours
Every 50 operating hours
Every 40 operating hours
After 20 operating hours
every 48 months
every 12 months
●