Table of Contents
Advertisement
●
or
to [Other Recpnt] and press the Menu Select button below Edit. When a blinking
cursor appears on the Enter Address screen. Use the keypad to type the address entry.
Proceed to
step 9
9. Press the Menu Select button directly below Send or press the PTT button to send the message.
The display shows the Send Message screen and Sending msg.
If the message is sent, you hear a tone and the display shows Msg sent.
If the message is not sent, you hear a low tone, the display shows Send failed and returns to the
main TMS screen.
NOTE: You can append a priority status and/or a request reply to your message. See
Status and Request Reply for New Text Messages on page 89
7.16.4
Priority Status and Request Reply for New Text
Messages
This feature only supports Model 3.5 and Model 2.5.
Before sending your message, you can add a priority status, request reply, or both to your message.
7.16.4.1
Appending a Priority Status to a Text Message
Prerequisites: Ensure that an outgoing message is composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 87
When and where to use:
NOTE: The Priority Status icon on a message does not imply that the message gets higher priority over
the other messages when it is being transmitted. It is just an indication that can be embedded into a
message to let the receiver know that the message is important.
Procedure:
1. Press the Menu Select button directly below Optn .
2.
or
to Mark Important and press the Menu Select button directly below Sel to indicate that
the message is important.
Result: The priority status icon appears beside the normal message icon on the label bar.
7.16.4.2
Removing a Priority Status from a Text Message
Prerequisites: Ensure there is an outgoing message composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 87
Procedure:
1. Press the Menu Select button directly below Optn .
2.
or
to Mark as Normal and press the Menu Select button directly below Sel to remove the
priority status from the message.
Result: The display shows the normal message icon on the label bar.
to send the message.
Chapter 7: Advanced Features
for more information.
for more information.
for more information.
MN004482A01-AN
Priority
89
Advertisement
Table of Contents
