Exiting Fall Alert; Reinitiating Fall Alert; Automatic Registration Service; Selecting Or Changing The Ars Mode - Motorola APX 8000HXE 3.5 User Manual

MN004482A01-AN
Chapter 7: Advanced Features
2. Lay the radio down in a horizontal position.
Result:
The radio plays an alert tone and the display shows Man-Down.
Postrequisites: If Fall Alert is configured but the condition does not trigger the activation of the feature, send
the radio to a qualified technician.
7.14.3

Exiting Fall Alert

Procedure:
To exit Fall Alert mode, press Clr.
7.14.4

Reinitiating Fall Alert

Procedure:
To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions:
● Return the radio to a vertical position.
● If motion sensitivity is enabled, shake the radio.
7.15

Automatic Registration Service

This feature only supports Model 3.5 and Model 2.5.
Automatic Registration Service (ARS) provides an automated data application registration for your radio.
When you turn on the radio, the device automatically registers with the server. Data applications within the
fixed network determine the presence of a device on the system and send data to the device.
The ARS consists of the following mode:
● ARS Server Mode (Default mode)
● ARS Non-server Mode
7.15.1

Selecting or Changing the ARS Mode

When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the methods
is the same. You can use the options interchangeably depending on your preference and the programmed
functions.
Procedure:
● Selecting or Changing the ARS mode using the 16-Position Select knob:
a. Once the zone you want is displayed, turn the preprogrammed 16-Position Select knob to the
desired mode.
● Selecting or Changing the ARS mode using the radio menu:
a. or to Chan .
84