Table of Contents
Advertisement
If successful, the display shows Pairing in progress... followed by a randomly generated
numeric PIN, Compare PIN: XXXXXX.
If unsuccessful, the display shows BT profiles not supported. The display returns to Available
Dev screen.
2. Press Ok to continue pairing the radio and the device.
The pairing process can be canceled by pressing the Menu Select button below Cncl.
If successful, the display shows Pairing in progress,<Device Friendly Name> paired,
Connecting in progress... followed by <Device Friendly Name>connected. The display
returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will occur:
●
The display shows <Device Friendly Name> pair failed (if the PIN numbers are
different).
●
<Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
7.25.3
Viewing and Clearing the Bluetooth Device Information
Procedure:
1.
or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen.
2.
or
to Devices.
Once the display highlights the Devices, the display shows XX connected alternates with XX
paired.
3. Press the Menu Select button directly below Sel.
4. If there are devices being paired or connected,
to see the status of each device.
If there are no active Bluetooth devices being paired or connected, the display shows No devices.
5. Perform one of the following actions:
●
To clear the device from the list,
directly below Clr.
●
To exit from this function, press the Menu Select button directly below Back to return to the
previous screen without deleting the device name.
If Clr is selected, the display shows <Device Friendly Name> clear?.
6. Press the Menu Select button directly below Yes or No to proceed delete the device or to exit this
function and return to previous screen.
Result: If the device is deleted successfully, the display shows <Device Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The display
shows <Device Friendly Name> clear failed. The display returns to previous screen.
or
along the list of <Device Friendly Name>
or
to the required device, press the Menu Select button
MN004482A01-AN
Chapter 7: Advanced Features
121
Advertisement
Table of Contents
