Table of Contents
Advertisement
This feature allows you to stun another radio by sending an Over-The-Air command using the menu on
your radio. This feature prevents an unauthorized user from using the radio. Once the radio is stunned, a
password is required to reactivate the stunned radio.
7.20.1.1
Using Radio Stun
Procedure:
1.
or to Stun.
2. Press the Menu Select button directly below Stun.
The display shows Enter Password.
3. Use the keypad to enter your Tactical Inhibit Encode Password.
4. Press the Menu Select button directly below Ok .
The display shows radio Contact IDs.
5. Perform one of the following actions:
●
or
to the required ID.
●
Press the Menu Select button directly below LNum to go to the last number dialed.
●
Use the keypad to enter the required ID.
●
Press the Menu Select button directly below Send to initiate command.
If the receiving radio does not have encryption key to decrypt the received command, your radio
display shows Ack received.
If the receiving radio does not have encryption key to decrypt the received encrypted command, your
radio display shows Decrypt failed.
If the receiving radio is powered off or already killed, your radio display shows No Acknowledgment.
Result: Once the receiving radio received the command, its screen locked and request for password.
7.20.2
Radio Kill
This feature allows you to render your radio or another radio inoperable if the radio is misplaced or lost. When
a radio is killed, the display turns blank, and all functions of the radio are not usable.
The killed radio can only be recovered with a special device. Consult an authorized and qualified technician
for details.
7.20.2.1
Using Remote Kill to Kill Another Radio
When and where to use: Remote Kill allows you to render another radio inoperable by sending an over-the-
air command using the menu on your radio.
Procedure:
1.
or to Kill.
MN004482A01-AN
Chapter 7: Advanced Features
105
Advertisement
Table of Contents
