Using Syslog - ZyXEL Communications P-2608HWL-D1 Support Notes

Trap:
Community= public
Destination= 192.168.1.33
Press ENTER to Confirm or ESC to Cancel:
Field Settings for SNMP Configuration
Option Descriptions
Enter the Get Community. This Get Community must be the same 'Get-' and 'GetNext'
Get Community
community requested from the NMS. The default is 'public'.
Enter the Set Community. This Set Community must be the same 'Set-community
Set Community
requested from the NMS. The default is 'public'.
Enter the IP address of the NMS. The Prestige will only respond to SNMP messages
Trusted Host coming from this IP address. If 0.0.0.0 is entered, the Prestige will respond to all
NMS managers.
Enter the community name in each sent trap to the NMS. This Trap Community must
Trap
match what the NMS is expecting. The default is 'public'.
Community
Enter the IP address of the NMS to which you wish to send the traps. If 0.0.0.0 is
Trap Destination
entered, the Prestige will not send traps to any NMS manager.

Using syslog

4. Prestige Setup
Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
UNIX Syslog:
Active=
Syslog IP Address=
Log Facility= Local 1
All contents copyright (c) 2005 ZyXEL Communications Corporation.
P-2608HWL Series Support Notes
Yes
192.168.1.33
74