Group Ring - ZyXEL Communications P-2608HWL-D1 Support Notes

the mode that your voice service provider supports.
Select Europe Type to use the supplementary phone services in European
mode.
Select USA Type to use the supplementary phone services American mode.
See your User's Guide for supplementary phone service details.
To take full advantage of the supplementary phone services available
through the Prestige's phone ports, you may need to subscribe to the
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.

Group Ring

Group Ring can help user to identify where the incoming call come from (SIP, predefined group, PSTN...etc)
by specifying a distinctive ring to each group. User can use WEB GUI to configure this feature. User must set
the different phone number in the table shown below and then select a special ring tone from type A to type H
for each group. After successfully configure the group ring, the incoming call will have distinctive ring for each
group. If the incoming phone number is not in the table, it will ring based on where it comes from (SIP1 ~ SIP 8,
PSTN, Internal Call)
Below are the screenshots to explain the usage of this particular feature.
1. Test the ring before configure the group ring function
All contents copyright (c) 2005 ZyXEL Communications Corporation.
P-2608HWL Series Support Notes
services from your voice service provider.
140