Does the Prestige support dynamic secure gateway IP?
If the remote VPN gateway uses a dynamic IP, enter 0.0.0.0 as the Secure Gateway IP Address on the
Prestige. In this case, the VPN connection can only be initiated from the gateway that uses the dynamic IP
address to the gateway that uses a fixed IP address. This is to allow the gateway with a dynamic IP
address to update its dynamic IP address to the remote peer. However, if both gateways use dynamic IP
addresses, a VPN connection cannot be established.
Which VPN gateways have been tested to work with the Prestige?
The following VPN gateways have been tested and verified to work with the Prestige.
•
Cisco 1720 Router, IOS 12.2(2)XH, IP/ADSL/FW/IDS PLUS IPSEC 3DES
•
NetScreen 5, ScreenOS 2.6.0r6
•
SonicWALL SOHO 2
•
WatchGuard Firebox II
•
ZyXEL Prestige 100
•
Avaya VPN
•
Netopia VPN
•
III VPN
Which VPN client software has been tested to work with the Prestige?
The following VPN client software applications have been tested and verified to work with the Prestige.
•
SafeNet Soft-PK, 3DES edition
•
Checkpoint Software
•
SSH Sentinel, 1.4
•
SecGo IPSec for Windows
•
F-Secure IPSec for Windows
•
KAME IPSec for UNIX
•
Nortel IPSec for UNIX
•
Intel VPN, v. 6.90
•
FreeS/WAN for Linux
•
SSH Remote ISAKMP Testing Page, (http://isakmp-test.ssh.fi/cgi-bin/nph-isakmp-test)
•
Windows 2000, Windows XP IPSec
All contents copyright (c) 2005 ZyXEL Communications Corporation.
P-2608HWL Series Support Notes
174