How To Connect Lifeline And Dsl Connection; All Contents Copyright (C) 2005 Zyxel Communications Corporation - ZyXEL Communications P-2608HWL-D1 Support Notes

After configuring the PSTN setup, click "Apply＂ to save changes back to P2608HWL.
Note: It is recommended to configure your local emergency services such as Police Dept, Fire Dept, and
Emergency Medical services phone number in this field. Thus in any cases, these unit can be reach in case of
emergency by dialing their number without prefix, regardless if there are power loss.

How to connect Lifeline and DSL connection

To use both VOIP and regular phone service with P2608HWL＇s lifeline feature. You will need to connect
ADSL line and phone line appropriately and make proper configuration.
Making the correct connection it allows you to still receive phone calls while someone else is making outgoing
VoIP call though Prestige＇s 8 pots port, the following figure shows you how to connect your phone and DSL
service.
If your ADSL line type is Splitter type you ISP will provide you with splitter otherwise it should be splitterless.
For correct info you may check with your service provider as for which type of line you have.
Figure 1 Splitter type
1. The P2608HWL Series includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the
DSL port and connect RJ-11 to Lifeline port.
2. Connect the RJ11 to the splitter phone jack or a telephone wall jack
3. Connect the DSL cable to the splitter modem jack or ADSL line
4. Connect the splitter jack where it labels Line to ADSL line from the ISP.

All contents copyright (c) 2005 ZyXEL Communications Corporation.

P-2608HWL Series Support Notes
117