Table of Contents
Advertisement
You can listen to two tapes consecutively with the procedure below.
mi±
(Step 4 also available from the remote control)
1
Load cassettes in decks 1 and 2.
Load with the side that you wish to listen to first facing you in
deckl.
2 Press REVERSE MODE to set the
CO
mode.
3 Press DOLBY NR if the cassette you want to
play was recorded with Dolby noise reduction
B or C mode.
The Dolby noise reduction indicator (B or C) will light.
If the tape was not recorded in a Dolby NR mode, press the
Dolby noise reduction button and the Dolby noise reduction
indicator (B or C) will go off.
Notes:
•You cannot select Dolby NR for deck 1 and deck 2 respec¬
tively.
•We recommend that you use cassettes of the same type
(Dolby noise reduction) in both decks.
4 Press deck 1 forward-side playback button
(>■) to start playback.
Two tapes will play back as follows:
Forward
n.
Reverse
's\.
Forward side\.
Reverse \
side of tape
y side of tape
of tape in
) side of tape '
in deckl
/ in deckl
X deck 2
/ in deck 2 /
After repeating above operation 8 times, the tape will automatically
stop.
You can also start playback from a position other than the forward
side of the tape in deck 1.
■ To stop sequential tape play
(Also available from the remote control)
Press the stop/cassette holder open button in
which the tape Is currently playing.
mi±
Advertisement
Table of Contents
