Table of Contents
Advertisement
<D V. Bass button and indicator (V. BASS)
Press to boost the dynamic low-frequency ranges.
(See page 60.)
© Microphone volume control (MIC VOL)
Use to adjust the microphone volume level.
® Display mode select button
(DISPLAY, -SPECTRUM, -MODE)
Use to select one of 5 spectrum modes.
Press and hold to extinguish the equalization curve.
(See page 74.)
© Microphone jack (MIC)
Plug microphone cord into this jack.
© Demonstration button (DEMO)
Use for reference of the adjustments of equalization curves
and SFP mode sounds. The pre-programmed equalization
curves and SFP mode sounds will be heard sequentially for
adjustment example. (See page 53.)
© Multi level display
Shows the equalization/spectrum analysis level.
© SFP mode indicator (SFP)
Lights when you select the SFP mode [HALL, LIVE, DISCO,
CHRCH, THTER (Only for model SH-CH750)].
© Effect indicator (EFFECT)
Lights when you select EFFECT mode by pressing JOG
MODE.
(
0
) Equalizer mode indicator (EQ)
Lights when you select the equalizer mode (HEAVY, CLEAR
SOFT, HP ST, CAR).
© Equalizer frequency indicator (EQ. F)
Lights when you select EQ. F mode by pressing JOG MODE.
© Key control indicator (KEY CON)
(For model SH-CH750, only for Australia and New Zea¬
land)
Lights when you press KEY CON to adjust the key level while
in the "Karaoke" mode.
© Equalizer level indicator (EQ. L)
Lights when you select EQ. L mode by pressing JOG MODE.
© Echo indicator (ECHO)
(For model SH-CH750, only for the area except for
Australia and New Zealand)
Lights when you press ECHO to adjust the reverberation
sound while in the "Karaoke" function.
© Voice mute indicator (V. MUTE)
Lights when you activate the "Karaoke" function.
© Sound mode display
Shows the sound mode you select or the length of the rever¬
beration sound, delay time (Only for model SH-CH950), etc.
© Memory indicator (MEMO)
Lights when you store the desired curve or simulated listening
environment.
15
Advertisement
Table of Contents
