Table of Contents
Advertisement
Switch on the power and be sure you've completed the steps of
"Automatic memory presetting" on page 27 or "Manual memory
presetting" on page 28.
■ From the main unit
(Also available from the remote control)
Press one of PRESET to select the desired preset
channel.
The selected preset channel will appear on the display.
Preset channel
■ From the remote control
1
Press TUNER/BAND.
2
Press one of the preset-tuning buttons corre¬
sponding to the preset channel you wish to
tune in.
To select a preset channel between 1 and 9:
Press the appropriate preset-tuning button 1-9 directly.
To select a two-digit preset channel:
First press >10 and then a preset-tuning button 1-0.
For example:
Preset channel 13: I £io KH~H]
Preset channel 20: I eio |—TF1—ToI
Preset channel 35: fEioT-fTHTI
■ Most recent memory
The most recent memory system remembers the broadcast station
last tuned in when you switch the power to standby mode or select
other functions. When you switch the tuner back on, the last tuned
station will be on.
The programmed settings will stay in the memory for approximately
2 weeks, even if the power cord is disconnected.
Advertisement
Table of Contents
