Table of Contents
Advertisement
Step4: Adjustingthe LCDscreenandviewfinder
Open
tile LCD screen
90 degrees
to the
camcorder
(@), then rotate
it to tile best angle
to record
or play/@).
® ts0
D]SP/BATT
]NFO
@90degrees
@90de
reestothe
(max.)
camcorder
• Be carelul not to press tile buttons on the LCD
flame accidentally
when you open or ad.iusl tile
LCD scrcen.
• If you open the LCD screen 90 degrees to the
canlcorder, thin1 rotate it 180 degrees 1o lhe lens
side, you can close it wilh the LCD screen side
litcing out. This is convcnimlt during playback
operalions,
To turn off the LCD backlight
to make
the battery last longer
Press and hold DISP/BATT INFO for a few
seconds until :E_o_F appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded picture
will not be affected by the setting. To cancel.
press and hold DISP/BATT INFO until _E"_O_F
disappears.
• See [LCD/VF SET] - [LCD BRIGHT] (p.78) to
a([iust tile brightness
oI tile LCD screen.
You can view pictures using the viewfinder
with the LCD panel closed to axoid wearing
down the battery, or when the picture seen on
the LCD screen is poor.
Viewfinder
Viewfinder
lens
adjustment
lever
Rai_ the vicwfinder and
move it until tile picture
is clear.
• You can a@_sl tile brighlness of lhe vicwfinder
backligla by selecting [LCD/VF SETI - [VF
B.LIGHT]
(p.78).
The recorded picture will not be al]ccled by the
setting.
• You can a([iusl [FADER] and [EXPOSUREI
while looking lhrough the viewfinder (p.69, 75).
¢/a
E
25
Advertisement
Table of Contents
