Advertisement
Quick Links
For one-to-one connection
between your MD DISCAM
and your PC at home, follow
the steps here.
STEP1
Preparing for
connection.
STEP2
Connect the MD
DISCAM to your
PC.
STEP3
Set your PC.
STEP4
Set your MD
DISCAM.
STEP5
Send images to
your PC.
Note!
Be careful when
switching from the
Internet to the MD
DISCAM
STEP1-2
Add an Ethernet
Terminal to your
PC.
STEP3
Set your PC.
STEP4
Set your MD
DISCAM.
STEP5
Send images to
your PC.
Note!
Be careful when
switching from the
Internet to the MD
DISCAM
For those who make a one-to-one connection
between the MD DISCAM and your PC at
home, click the desired step in the yellow area
on the left-hand side of the screen. For those
who connect the MD DISCAM to a PC on a
LAN in your office or home, begin by choosing
the desired step in the green area located on the
right-hand side of the screen.
STEP1
Connect the MD
DISCAM to your
PC.
STEP2
Setting the proxy
server.
STEP3
Setting the MD
DISCAM.
STEP4
Send images to
your PC.
Note!
Be careful about
multiple
connections from
various PCs.
To connect your MD
DISCAM to the PC on a
LAN, follow the steps
here.
STEP2
Setting the proxy
server.
STEP3
Setting the MD
DISCAM.
STEP4
Send images to
your PC.
Note!
Be careful about
multiple
connections from
various PCs.
Advertisement
Related Manuals for Sony Handycam DCM-M1
Summary of Contents for Sony Handycam DCM-M1
- Page 1 For one-to-one connection between your MD DISCAM and your PC at home, follow the steps here. STEP1 Add an Ethernet Preparing for Terminal to your connection. STEP2 Connect the MD DISCAM to your STEP3 Set your PC. Set your PC. STEP4 Set your MD Set your MD...
- Page 2 MD DISCAM is equipped with an Ethernet Terminal for the connectionto a PC. The one-to-one connection between the MD DISCAM and the PC requires an Ethernet Terminal on the PC as well. Q: Is your PC equipped with an Ethernet Terminal? Does your PC have the built-in Ethernet Terminal (Refer to the illustration on the left.)? Is an Ethernet Board or an...
- Page 3 *Contact the manufacturer regarding the installation of the board or card.(The MD DISCAM will not provide customer support for the above devices.) *The PCI slot type is recommended since it is easier to install. But please note that some PC do not support PCI or have no free slots left. Back to MD DISCAM Top page A commercially available LAN board or LAN card is required to...
- Page 4 After preparing the Ethernet Terminal, connect the MD DISCAM to your PC with the power off. A commercially available Cross Cable is necessary for connection. Connect one end to your MD DISCAM and the other to your PC. Q: What is the OS for your PC? Next, let's set your PC.
- Page 5 Now you have set your PC. Let's move on to the MD DISCAM. Back to MD DISCAM Top page When you connect the MD DISCAM to your PC, you need to make Windows settings. 1. Open "Network" from the Control Panel. 2.
- Page 6 Back to MD DISCAM Top page After setting your PC, you need to set the MD DISCAM. 1. Select "ADVANCED" - "PC CONNECT" - "SET UP" from the menu of the MD DISCAM. 2. Select " Manual". Touching the white up-and-down arrows with the input pen or using the control dial and set the following.
- Page 7 Movie size (pixel) 1 : 4 = 144*122 frames/sec The MD DISCAM and the PC have now been disconnected. Now let's set the PC after the disconnection of MD DISCAM as a precaution. Back to MD DISCAM Top page When the settings of the PC connection with the MD DISCAM have been completed, the home page address (http://192.168.0.10/) shown on the left appears on the screen.
- Page 8 (*)Checking "Never dial a connection" of "Internet Options" will prevent this window from appearing. Such a setting, however, requires a manual connection to the desired Internet access point on "Dial-up Networking". Back to MD DISCAM Top page Note! When you switch the connection of your PC to the MD DISCAM from the Internet, make sure to disconnect the Internet first and then connect your PC to the MD DISCAM.
- Page 9 10. Go to the next step without inputting anything for "Domain Name Server","Electronic Mail Address and Password", "Electronic Mail Account and Host Computer" and "News Group Host Computer". 11. Do you use proxy servers for INternet connections? - Select "No". The setup of the PC has been completed.
- Page 10 •@ 8. When you close the TCP/IP menu, "Do you save the change to current setting?" will appear. Select "save". You have completed the settings on your computer. Back to MD DISCAM Top page When you connect your MD DISCAM to your PC, power and set up is as follows.
- Page 11 Back to MD DISCAM Top page When your have completed settings of your PC, make settings of your MD DISCAM. 1. Select "ADVANCED" - "PC CONNECT" - "SET UP" from INDEX MENU of the MD DISCAM. 2. Select " Manual". Touching white up-and-down arrows with the input pen or using Control Dial, make settings as follows.
- Page 12 Movie size (pixel) 1 : 4 = 144*122 frames/sec The connection between the MD DISCAM and the PC is now over. Finally, let's make settings of the PC after disconnecting the MD DISCAM as a precaution. Back to MD DISCAM Top page When the settings of the PC connection of the MD DISCAM have been completed, the home page address (http://192.168.0.10/) shown on the left appears on the...
- Page 13 Now, the setting of the PC has been restored for Internet connection. When you connect the PC to the MD DISCAM again, select the setting for MD DISCAM ("MD DISCAM" in the above case) on theTCP/IP settings to switch the connection. Back to MD DISCAM Top page You cannot connect your PC to the Internet having left the TCP/IP settings on the PC in...
- Page 14 Note! : Contact a LAN administrator DISCAM to a LAN installed in a company or a school. In some cases, you cannot automatically obtain an address for the MD DISCAM. In that case, you will have to set the address assigned by the administrator manually. The MD DISCAM has a built-in Ethernet terminal for connection to a PC.
- Page 15 Now you have set your PC. Let's move on to the MD DISCAM. Back to MD DISCAM Top page When you connect the MD DISCAM to your PC, you need to make Windows settings. 1. Open "Network" from the Control Panel. 2.
- Page 16 Back to MD DISCAM Top page After setting your PC, you need to set the MD DISCAM. 1. Select "ADVANCED" - "PC CONNECT" - "SET UP" from the menu of the MD DISCAM. 2. Select " Manual". Touching the white up-and-down arrows with the input pen or using the control dial and set the following.
- Page 17 Movie size (pixel) 1 : 4 = 144*122 frames/sec The MD DISCAM and the PC have now been disconnected. Now let's set the PC after the disconnection of MD DISCAM as a precaution. Back to MD DISCAM Top page When the settings of the PC connection with the MD DISCAM have been completed, the home page address (http://192.168.0.10/) shown on the left appears on the screen.
- Page 18 Is the browser for your PC set to make access via a proxy server? When access is made through a proxy server, the following "Exceptional Settings" must be added. (When in doubt, contact a network administrator.) 1. Select Control Panel - "Internet Options". 2.
- Page 19 Back to MD DISCAM Top page The necessary settings of your PC are over. Next, let's make settings for the MD DISCAM. 1. Select "ADVANCED" - "PC CONNECT" - "SET UP" from the menu of the MD DISCAM. 2. Select "Automatic". 3.
- Page 20 Movie size (pixel) 1 : 4 = 144*122 frames/sec The MD DISCAM and the PC have now been disconnected. Please read the note of the LAN connection of the MD DISCAM. Back to MD DISCAM Top page When the settings of the PC connection of the MD DISCAM are completed, the home address (http://192.168.0.10/) shown on the left is displayed.
- Page 21 Is the browser of your PC set to make access via a proxy server? When access is made through a proxy server, the following "ExceptionalSettings" must be added. (When in doubt, contact a network administrator.) 1. Open the settings (default) of your browser. 2.
- Page 22 When accessing the MD DISCAM from the PC on a LAN, multiple PC access to the MD DISCAM is not recommended. Concurrent access may sometime cause an extremely delayed response and a hang-up of the system on the MD DISCAM. Please be sure to access from a single PC.
- Page 23 10. Go to the next step without inputting anything for "Domain Name Server","Electronic Mail Address and Password", "Electronic Mail Account and Host Computer" and "News Group Host Computer". 11. Do you use proxy servers for INternet connections? - Select "No". The setup of the PC has been completed.
- Page 24 •@ 8. When you close the TCP/IP menu, "Do you save the change to current setting?" will appear. Select "save". You have completed the settings on your computer. Back to MD DISCAM Top page When you connect your MD DISCAM to your PC, power and set up is as follows.
- Page 25 Back to MD DISCAM Top page When your have completed settings of your PC, make settings of your MD DISCAM. 1. Select "ADVANCED" - "PC CONNECT" - "SET UP" from INDEX MENU of the MD DISCAM. 2. Select " Manual". Touching white up-and-down arrows with the input pen or using Control Dial, make settings as follows.
- Page 26 Movie size (pixel) 1 : 4 = 144*122 frames/sec The connection between the MD DISCAM and the PC is now over. Finally, let's make settings of the PC after disconnecting the MD DISCAM as a precaution. Back to MD DISCAM Top page When the settings of the PC connection of the MD DISCAM have been completed, the home page address (http://192.168.0.10/) shown on the left appears on the...
- Page 27 Now, the setting of the PC has been restored for Internet connection. When you connect the PC to the MD DISCAM again, select the setting for MD DISCAM ("MD DISCAM" in the above case) on theTCP/IP settings to switch the connection. Back to MD DISCAM Top page You cannot connect your PC to the Internet having left the TCP/IP settings on the PC in...