Step 4: Adjustingthe Lcdpanel And Viewfinder; Adjusting The Lcd Panel - Sony Handycam DCR-PC109 Operation Manual

Step 4: Adjustingthe
LCDpanel and
viewfinder
You can adjust the angle and brightness of
the LCD panel to meet various recording
situations.
Even when there are obstructions between you
and the su[ziect, you can check the subject on the
LCD screen during recording by adjusting the
angle of the LCD panel.
Maximum
180 degrees
Maximum
90 degrees
Open the LCD panel
LCD BACKLIGHT
Open the L('D panel 90 degrees to the
camcorder, then rotate it to the desired
position.
Toadjust thebrightness ofthe LCDscreen
1 Touch _.
2 Touch [LCD BRIGHT1.
If the item is not displayed on the screen,
touch If you cannot find it, touch
[MENU], (STANDARD SET) menu,
then tonch [LCD, VF SET] (p. 85).
3
Adjust the item with [_]/[_], then
touch [_l.
"_° Tips
• If you letate the LCD panel 180 degaees to the lens
side, you can close the LCD panel with tile LCD
screen t=acing out.
• If you are using tile battel 7 pack for power source,
you can adjust the brightness by selecting [LCD BL
LEVEL] from the [LCD_\'F SET] on the
(STANDARD SET) menu (p 85).
• When you use yore- camcorder in bright conditions,
press LCD BACKLIGHT to switch off the LCD
screen backlight (_C'_o_F appears on the screen.). This
setting saves battel_" power
• Even if you adjust the LCD screen backlight, the
recorded pictme will not be affected.
• You can turn offthe operation confirmation beep by
setting [BEEP] in file _} (STANDARD SET)
menu to [OFF] qJ. 87).
You can view images using the viewfinder
when you close the LCD panel. Use the
viewfinder when the battery is running out, or
when the screen is hard to see.
Viewfinder lens
adjustment Iever
Extend the viewfinder until it clicks.
Adjust the viewfinder lens adjustment
lever until the picture is clear.
/
¢D
--bcontinued
Getting started
21