Sony HANDYCAM DCR-DVD405 Operating Manual page 23

On the battery pack
• Belol_ changing the battmy pack, slide tile
POWER switch lo OFF (CHG).
• The CHG/eharge) lamp fl_shes during charging.
or BATTERY INFO (p.47) will not be correctly
displayed under lhe lollowing conditions.
Tim battery pack is not attached corrcctly.
The batte W pack is damaged.
The battel3' pack is lhlly discllarged.
/For BATTERY INFO only.)
• The power will not be supplied liom the battery
w, long as the AC Adaptor is connected to tile DC
IN jack of your camcorder, even when the power
cord is disconnected liom the wall outlet.
• Wc recolnmcnd that you use an NP-FP70. NP-
FP71 or NP- FP90 battery pack whml a video light
(optional) is attacbed.
On the charging/recording/playback time
• Times measured with tile camcorder at 25 °C
(77°F). (10-30r'C (50-86°F) is rccolnlncnded.)
• Available rccoMing and playback tilne will be
shorter when you u_ your canlcorder ill low
tenlperatures.
• The available recording and playback time will
be sholter depending on tile conditions under
wllicll you use your ealncordel2
On the AC Adaptor
• Connecl tile AC Adaptor to an easily accessible
wall oullet close by. II any trouble occurs while
using the adaptor, immediately slmt ollthe power
by disconnecting the plug fiom the wall outlet.
• Do not use the AC Adaptor placed in a narrow
space, sucll as between a wall and furniture.
• Do not short-circuit the DC plug of tile AC
Adaptor or battery terminal with any metallic
ot_iects. Tllis may cause a malfunction.
PRECAUTION
• Tile _1 is not disconnecled honl tile AC power
sourcc (house current) as long as it is connected
to the wall oulleL even if the set itself has been
turned oll_
¢/a
23