Table of Contents
Advertisement
2 | Installation / Connection
2. Plug the power cord into a power outlet and the power connector on the monitor.
Insert the power cord fully into the monitor.
2.4 Turning On the Power
1. Check if the main power switch is on.
2. Press
to turn on the power to the monitor.
The power switch indicator of the monitor lights up blue.
If the indicator does not light up, see
3. Turn on the PC.
The screen image appears.
If an image does not appear, see
Attention
• Depending on the PC settings, the display may not show correctly, or not be at the appropriate
scale. Check the settings for the PC if required.
• For the maximum power saving, it is recommended that the Power button be turned off. When
not using the monitor, you can turn off the main power supply or disconnect the power plug so
that the power is cut completely.
Note
• In order to maximize the monitor's lifespan by impeding brightness degradation and to reduce
power consumption, carry out the following:
– Use the power saving function of the PC or monitor.
– Turn off the monitor after using it.
20
No-Picture Problem
No-Picture Problem [} 23]
[} 23].
for additional advice.
Advertisement
Table of Contents
