Table of Contents
Advertisement
2.
Use a USB cable to connect a PC to the monitor.
3.
Use the DC power connector to connect to a power source.
2-2. Turning On the Power
1.
Press
to turn on the power to the monitor.
The monitor's power indicator lights up blue.
If the power indicator does not light up, refer to "5-1. No Picture" in the User's Manual.
2.
Turn on the PC.
The screen image appears.
If the screen image does not appear after turning on the PC, refer to "5-1. No Picture" in the User's
Manual.
Attention
• For maximum power saving, it is recommended that the Power button be turned off. When not using the
monitor, you can disconnect the power plug so that the power is cut completely.
2-3. Installing the Touch Panel Driver
Attention
• To install the touch panel driver, the user account needs "Administrator" privileges.
• To reinstall the touch panel driver in order to update the driver, uninstall the driver, and then restart the PC before
installation.
1.
Download the touch panel driver from our web site.
Note
• Use the following procedure to download the touch panel driver from our web site.
1. Access www.eizoglobal.com.
2. From the menu, select "Support" > "Software and Drivers".
3. In the "Enter name of model or software" text box, enter "FDX1502T", and then press the "Search" button.
4. Click the ZIP icon for the touch panel driver.
2.
If another touch panel driver is installed, uninstall it.
12
Chapter 2 Installation / Connection
USB cable
(USB-A - USB-B)
(commercially available)
USB-A
Advertisement
Table of Contents
