Table of Contents
Advertisement
3. Configuration Using the Web Interface
Adding a Slot-to-Slot Cross Connection
Procedure
To create a range of VCCs between specified slots and the SCP card:
3-14
1. On the Configuration - Cross Connect screen, click on Create Cross Connect
by Slot. The Configuration - Cross Connect - Slot screen appears.
2. Enter or select the following fields:
Field
Start Slot
End Slot
Start Port
End Port
Slot VPI
Slot VCI
Segment End Point (Slot)
SCP VPI
SCP Start VCI
Segment End Point
Upstream Profile
Downstream Profile
August 2005
Description
Select from the drop-down list the first slot in a range to
have connections established to the SCP card.
Select from the drop-down list the last slot in a range to
have connections established to the SCP card. It may be
the same as the Start Slot.
Select from the drop-down list the first port in a range to
have a connection established to the SCP card. The
range of ports will be applied to all slots selected.
Select from the drop-down list the last port in a range to
have a connection established to the SCP card. It may be
the same as the Start Port. The range of ports will be
applied to all slots selected.
Enter the VPI of this circuit.
Enter the VCI of this circuit.
Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This
field determines if the port card will function as an
endpoint for ATM OAM loopbacks. If False, the port card
will loop back a cell only if its location ID matches the
preconfigured location ID. (See
page 3-16.) All other loopback cells are passed to the
next segment.
Enter the VPI of this range of VCCs.
Enter the first VCI of this range of VCCs.
Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This
field determines if the port card will function as an
endpoint for ATM OAM loopbacks. If False, the port card
will loop back a cell only if its location ID matches the
preconfigured location ID. (See
page 3-16.) All other loopback cells are passed to the
next segment.
Select a profile for upstream traffic.
Select a profile for downstream traffic.
Configuring ATM Ports
on
Configuring ATM Ports
on
8900-A2-GB20-50
Advertisement
Table of Contents
