Paradyne COMSPHERE 3821Plus User Manual page 19

Attach the DTE Interface Assembly
The eight-slot DTE interface assembly can be mounted
on the left or the right side of the carrier. If you are
installing only one interface assembly, it must be mounted
on the same side you installed the NIM.
3821-A2-GB20-30
3000 SERIES
CARRIER
TABS
SLOTS
Figure 2-3. DTE Interface Assembly
February 1998
Procedure
1. Feed the eight tabs at the bottom of the DTE
interface assembly into the slots on the left or right
side of the carrier.
2. Insert the screws provided, but do not completely
tighten them. See Figure
BACKPLATE
ASSEMBLY
495-14799
3821Plus Modem Installation
2-3.
2-3