0511: Fusing Belt Smoothing Adjustment; 0512: Fuser Unit Speed Adjustment - Ricoh Pro C7500 Operator's Manual

5. Adjustment Settings for Operators
01: Auto Execute Belt Smoothing: For Belt
Scratches
02: Auto Execute Belt Smoothing: For Uneven
Gloss

0511: Fusing Belt Smoothing Adjustment

Set the conditions for Fusing Belt smoothing.
Setting Items
01: Roller Speed (Uneven Gloss)
02: Roller Speed (Belt Scratches:
Short Time)
03: Roller Speed (Belt Scratches:
Long Time)

0512: Fuser Unit Speed Adjustment

Performs adjustment to compensate for the deviation in the rotation speed of the fusing unit. The machine
adjusts the rotation speed of the fusing unit to an appropriate value.
This adjustment takes approximately three minutes. During adjustment, the machine displays a message
on the control panel. Do not open the front cover of the machine while the machine is adjusting the
rotation speed.
01: Execute
Specify the nip to optimize the line speed of the fusing unit.
208
Setting Items
Default
Value
100
Setting Item
Values
Normal
Frequently (With
Density Adjustment)
More Frequently
Most Frequently
Off
On
Max. Min.
Value Value
100 50
Remarks
Press [Execute] to execute the function.
Default Value
Normal
On
Step Unit
1 %