Ricoh Pro C7500 Operator's Manual page 182

4. Adjustment Setting Items for a Custom Paper
The lager value becomes, the earlier print starts. However, fusing quality may become lower.
Setting Item
01: Level: BW/FC/FCS
FCS
Under conditions below, set range of fusing start temperature.
FC with S
HQ is applied in DFE Setting
The lager value becomes, the earlier printing starts. However, fusing quality may become lower.
Setting Item
02: Level: Clear/Special/03: Level:
White/04: Level: Metallic/05: Level:
Option
S
Under conditions below, set range of fusing start temperature. Print using S
Only HQ is applied in DFE
The lager value becomes, the earlier print starts. However, fusing quality may become lower.
Setting Item
06: Level: Clear/Special/07: Level:
White/08: Level: Metallic/09: Level:
Option
BW/FC/FCS: Fuser Setting HQ
Under conditions below, set range of fusing start temperature.
B&W/FC/FC with S
HQ is not applied in DFE
The lager value becomes, the earlier print starts. However, fusing quality may become lower.
180
Max. Value Min. Value
16 1
Max. Value Min. Value
16 1
Max. Value Min. Value
16 1
Step Unit
1 None
Step Unit
1 None
Step Unit
1 None