1104: Image Position Gap - Ricoh Pro C7500 Operator's Manual

4. Adjustment Setting Items for a Custom Paper

1104: Image Position Gap

To adjust the position manually, use 1104 [Image Position Gap].
Image Position: Side 1/Image Position: Side 2
Adjust the vertical/horizontal position of the image to be printed on side 1/2 of the paper.
If J33 occurs, adjust the values by 1 mm toward the [+] side to widen the margins. Adjust the value
carefully for wider margin improves the separation of paper in the fusing unit, but may degrade the
deviation in image position.
Setting Item
01: Across Feed/02: With Feed/03:
Across Feed/04: With Feed
Image Magnification: Side 1/Image Magnification: Side 2
Adjust the vertical/horizontal image scaling on the side 1/2 of the paper according to the paper
expansion or shrinkage.
Setting Item
05: Across Feed/07: Across Feed
06: With Feed/08: With Feed
Trapezoidal Distortion: Side 1/Trapezoidal Distortion: Side 2
Adjust the perpendicularity (image magnification of trailing edge with across feed direction) of side
1/2.
Setting Item
09: Operator Side/10: Opposite Side of
Operator/11: Operator Side/12:
Opposite Side of Operator
160
Max. Value Min. Value
3 -3
Max. Value Min. Value
0.5 -0.5
Max. Value Min. Value
0.34 -0.34
Step Unit
0.01 mm
Step Unit
0.001 %
0.025
Step Unit
0.001 %