Note that when there is paper that is ejected normally on the tray, the remaining paper is stacked over
the existing paper on the tray.
Setting Item
01: Finisher Shift Tray 1
02: Stacker Upper Tray
03: Second Stacker Upper Tray
0307: Auto Continue Paper Feeding
Specify whether to resume feeding paper automatically when a feeding problem occurs on a specific
tray.
Setting Item
01: Tray 1
02: Tray 2
03: 2-Tray LCIT: Bypass Tray
04: 2-Tray LCIT: Tray 3
05: 2-Tray LCIT: Tray 4
06: 2-Tray LCIT: Tray 5
07: 2-Tray LCIT: Tray 6
08: 2-Tray LCIT: Tray 7
09: 2-Tray LCIT: Tray 8
03: Machine: Paper Feed/ Output
Setting Value
Off
Off
On
Setting Value
Off
Off
On
Default
Default
205