Hands-Free Mic Installation - Boss Audio Systems BCPA12 User Manual

Bluetooth 340 watts single-din mp3-compatible digital media am/fm receiver apple carplay android auto wired featuring 12" 305 mm capacitive touchscreen and multicolor illumination options
Table of Contents

Advertisement

Connections

Hands-Free Mic Installation

Placement
The unit comes with a hands-free microphone
with sticky base and 10ft wire.
The location of the microphone can vary
from different vehicles due to layout, interior
materials, etc.
The
Red
shaded areas are the recommended
locations for best microphone performance.
Items to look for before placement:
• Do not place in front of air vents.
• If the vehicle has tweeters placed on sail
panel, do NOT locate the microphone on
steering column area.
• The front of the microphone must not be
blocked.
• Microphone should be firmly attached to
mounting location.
• Do not cover the grille openings surrounding
the microphone.
• To avoid excessive wind noise, do not place
near the sunroof opening.
Attach the Microphone
1.
Clean the mounting surface.
2.
Remove the backing paper from the
microphone base, then stick the base onto
the mounting surface.
3.
Route and secure the microphone wire
properly.
WARNING
Run the microphone wire where it will NOT
impede with the operation of any safety items
(e.g. airbags, knee airbags, etc.)
33

Advertisement

Table of Contents
loading

Table of Contents