Parking Assist Guidelines Setting; System Information; Firmware Version Information; Firmware Update - Boss Audio Systems BCPA12 User Manual

System Settings
Camera Settings

Parking Assist Guidelines Setting

[Parking Assist Guidelines]: Disable the parking
assist guidelines built in the unit if your rear
camera view has its own parking assist guides.
[Parking Assist Setup Wizard]: Adjust the
parking assist guidelines built in the unit.
Touch and drag a square icon to reposition the
related guideline. Repeatedly touch an arrow
icon to fine tune positioning of the related guide
line. Touch [OK] to confirm the adjustment.
To reset to the default positioning of the guide
lines, touch [Reset].
From the home menu, touch [SETTINGS] >
[About] to access system information.
XXXX-XXXXXX
XXXXXX-XXXXXX
X.X.X
X.X.X

Firmware Version Information

Version information starts with MCU, SOC,
Hardware Version, or Bluetooth Version.

Firmware Update

We continually try to improve our product. The
product can be updated if needed.
[Update]: Touch to prompt firmware update.
Make sure a USB flash drive with a newer
firmware is connected to the unit's rear USB
port (not the front USB-C port). The firmware file
must be saved in the root directory of the USB
flash drive. Unzip the file and make sure the file
name shows "BIN" extension after zipping.

System Information

Resetting the Unit

[Factory Reset]: Reset the unit to the factory
settings.
CAUTION
Reset the unit only when the unit fails to
function normally. All your settings will be
erased after resetting.
27