Radio Settings; Radio Region Selecting; Rds/Rbds Activation; Rds/Rbds Information Display - Boss Audio Systems BCPA12 User Manual

System Settings

Radio Settings

From the home menu, touch [SETTINGS] >
[Radio] to access radio settings.

Radio Region Selecting

Select a radio region where your unit is in.
[North America]: Enable if your are in this area.
Tuner spacing : FM (200 kHz), AM (10 kHz)
[Latin America]: Enable if you are in this area.
Tuner spacing: FM (100 kHz), AM (10 kHz)
[Europe]: Enable if you are in this area.
Tuner spacing: FM (50 kHz), AM (9 kHz)

RDS/RBDS Activation

[RDS/RBDS]: Enable or disable RDS/RBDS
function.
When disabled, the unit will not receive RDS/
RBDS service carried by FM radio signals.
26

RDS/RBDS Information Display

[RT DATA DISPLAY]: Enable or disable a service
that allows FM stations to display additional
information (i.e. station name, program type or
other dynamic/static message).
IMPORTANT NOTE
Not all FM stations will have or display RDS/
RBDS information.

RDS/RBDS Traffic Announcement

[TA]: When enabled, the unit will automatically
tune in to traffic information broadcast despite
the media source you are currently in.
Once the traffic announcement ends, the
original source will automatically resume.

RDS/RBDS Alternative Frequency

[AF]: When enabled, the unit will automatically
locate the same tuning program on other
stations and select the strongest signal of those
being broadcast.
This feature is most useful on long trips when
your car goes out of the range of a radio station.

Camera Settings

From the home menu, touch [SETTINGS] >
[Camera] to access camera settings.

Camera Trigger Control

[Rear Camera Input]: Enable or disable rear
camera signal input.
[Front Camera Input]: Enable or disable front
camera signal input.
[Rear Camera View]: Enable or disable rear
camera view.
[Reverse Trigger Delay]: Delay trigger of rear
camera view by a set time. A proper time setting
prevents the unit's screen from blinking when
shifting gears.
IMPORTANT NOTE
For automatic rear camera trigger, ensure the
purple/white wire (labeled "REVERSE INPUT")
from the supplied wire harness is connected to
the reverse light. (P.28)