Table of Contents
Advertisement
Other External Devices
Audio/Video Input
Playback
From the home menu, touch
Audio or video input screen is displayed.
Audio Input
You can listen to an audio device (e.g. a mobile
phone or MP3 player) through this unit.
Audio Cable Connection
Connect the RCA inputs ("L-IN" and "R-IN") on
the unit's back to the audio output on your
device. (P.31)
If your device does not have an RCA, use the
following audio cable (not included).
• For a device with 3.5mm headphone jack, use
a 3.5mm to RCA audio cable.
• For a device with USB-C port, use a USB-C to
RCA audio cable.
• For an iPhone, use a lightning to RCA audio
cable.
Video Input
You can play video from a playback device (e.g.
a CD/DVD, ect. ).
AV Cable Connection
Using audio/video cables (not included), connect
.
the RCA inputs ("L-IN", "R-IN" and "V-IN") on the
unit's back to the RCA outputs (yellow/white/
red) on your playback device. (P.31)
IMPORTANT NOTE
Use the controls on the external device for
playback control.
Video cannot be viewed while driving. The
vehicle must be stationary and the parking
brake applied to enable viewing.
WARNING
Never rely solely on the backup camera; always
check your surroundings before backing up.
Images may appear reversed if your camera is
not properly installed or set up.
Do not use features of this unit if it cannot be
operated safely and legally in your location.
Make sure front/rear camera connection is
correctly made. (P.32)
Manual Camera Trigger
From the home menu, touch the rear camera
icon (
) or the front camera icon (
display the camera view.
Note: If the camera icon is grayed out, enable
the camera input. From the home menu, touch
[SETTINGS] > [Camera].
On the camera view screen, touch the camera
icon to switch between front and rear camera
view.
Automatic Camera Trigger
When the vehicle is put into reverse gear, the
rear camera view will turn on automatically.
The front camera view is not accessible when
reversing.
IMPORTANT NOTE
For automatic rear camera trigger, make sure the
purple/white wire (labeled "REVERSE INPUT")
from the supplied wire harness is connected to
the reverse light. (P.28)
Camera
) to
21
Advertisement
Table of Contents
