Boss Audio Systems BCPA12 User Manual page 10

Basic Operation
Unit Installation
Double DIN Opening Installation
This section explains the installation if your
vehicle has a double DIN opening (4" x 7").
1.
Remove the trim plate and the mounting
sleeve from the unit, as described in the
section "Single DIN Opening Installation".
2.
Using two supplied side brackets and screws,
fasten the unit to the double DIN opening.
Replace the trim plate after the installation.
Side bracket
Attach the Display
As illustrated below, insert the supplied display
into the head unit until it clicks.
Detach the Display
As illustrated below, hold down two release
buttons simultaneously to unlock the display
then pull the display out.
Release buttons
9