Remote Control Operation - Kohler Stillness Smart Soak K-31404-PF-HW1 Homeowner's Manual

Remote Control Operation

IMPORTANT! This remote control does not float.
NOTE: The bath is equipped with a waterproof remote control. The remote control contains a magnet that allows the
remote control to be docked on the rim of the bath in any of the four corners.
Switching Between °F and °C
Press and hold the "Up" and "Down" buttons simultaneously until the degree value changes.
Increasing the Temperature
NOTE: Once the temperature has reached 104°F (40°C), the temperature can still be increased. The temperature will
increase 1°F (0.56°C) after the "Up" button is pressed each time.
NOTE: If in Celcius mode, the temperature will change by 1°C (1.8°F).
Press the "Up" button once to increase the temperature 1°F (0.56°C).
Press and hold the "Up" button to increase the temperature 1°F (0.56°C) every 1/2 second.
Decreasing the Temperature
NOTE: If in Celcius mode, the temperature will change by 1°C (1.8°F).
Kohler Co.
Magnetic
5
1485077-5-B