Paradyne 3800Plus Release Note page 8

The following changes and additions apply to both the Change Options (cho) and Display Options (dso)
commands in support of 3800Plus R3.0 modems.
The DTE INTERFACE Configuration Set screen contains the new field Sync DTE rate. The values for
this field are 128000, 115200, 112000, 96000, 76800, 72000, 64000, 57600, 56000, 48000, 38400, 28800,
19200, 14400, 9600, 4800, 2400, and 1200.
The DTE DIALER Configuration Set Screen has a new value range for the AT escape char field: 1–255.
The V42/MNP/BUFFER Configuration Set screen contains seven new fields: Sync Compression mode,
SDC negotiation, SDC idle fill, SDC bit encoding, Sync DTE CRC, Sync flow control, and SDC delay
min. The values for the Sync compression mode field are directMode and HDLC/SDLC. The values for
the SDC negotiation field are LAPM_Buffer, LAPM_Discon. The values for the SDC idle fill field are
Flag_Fill and Mark_Fill. The values for SDC bit encoding field are NRZ and NRZI. The values for the
Sync DTE CRC field are Ignore and CRC16. The values for the Sync flow control field are none, Tx
Clock and CTS_Sync. The values for the SDC delay min field are Off and Rx Clock.
6800-A2-GK66-20 October 1996 11