Paradyne 3800Plus Release Note page 4

Call Test (ct)
The Call Test (ct) command performs dial test for the 3600 Series R3.5 DSUs. This command can be scheduled
and the destination for results can be specified.
The input screen contains the following fields.
Device
This field specifies the device to be tested.
Test Type
This field indicates the kind of dial test to be performed. Currently, the field only accepts dial tone so it
cannot be changed.
The results screen provides the information resulting from the test:
Call Test passed
Call Test failed – No dial tone
6800-A2-GK66-20 October 1996 5