Paradyne 3800Plus Release Note page 2

Release Notes Summary
In the COMSPHERE 6800 Series Network Management System Communications Products Support Command
Reference Manual (6800-A2-GB31-10), the following commands are new or enhanced:
Call Detail Display (cded)
Call Duration Distribution (cdud)
Call Occurrence Distribution (cod)
Call Test (ct)*
Change Address (cha)
Change Options (cho)
Change SPID (chspid)*
Change Telephone Number (chtn)
Configuration Change Notification (ccn)
Daily Historical Utilization (dhu)
Display Options (dso)
Display SPID (dsspid)*
Display Telephone Number (dstn)
Download Device Firmware (dndf)
Identity (id)
Manage Call Statistics (mcs)
Reset Device (rs)*
In the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide
(6800-A2-GE26-10), Table 5-2 is updated to include new alarms. Table A-1 in Appendix A is changed to reflect
the new device number 3821.
In the COMSPHERE 6800 Series Network Management System Command Quick Reference Guide
(6800-A2-GB15-10), two new menu items are added to the DDD Service Restoration menu to support the SPID
commands. The DDD Device Control menu and the DSU Device Control menu were both updated with one
menu item to support the Reset Device (rs) command. The DDD Circuit Test menu was updated with one menu
item to support the Call Test (ct) command.
In the COMSPHERE 6800 Series Network Management System Communications Products Support
Configuration Guide (6800-A2-GB20-10), two new commands added to Table 1-2.
In the COMSPHERE 6800 Series Network Management System Core Command Reference Manual
(6800-A2-GB30-10), new values are added to the Access module id field of the crdp, dldp, dsdp, and eddp
commands.
*Call Test (ct) and Reset Device (rs) are new commands. Change SPID (chspid) and Display SPID (dsspid) are new
commands from an earlier release.
2
October 1996 6800-A2-GK66-20