When checking the P.C.B.s:
•
Spread the rubber sheet and the cloth. Then place
this unit on the cloth and check it. (Fig. 4)
•
Reconnect all cables (connectors) that have been
disconnected.
•
Connect the ground point (ST501) of the OPERATION
P.C.B. to the chassis with a ground lead. (Fig. 4)
•
When connecting the flexible flat cable, be careful
with polarity.
Rubber sheet and the cloth
ゴムシー トと布
Ground lead
アース線
OPERATION P.C.B.
Ground lead
アース線
Sub-panel unit
サブパネルユニッ ト
P.C.B. をチェックする場合には:
・ ゴムシートと布を敷き、 その上に本機を置いてチェッ
クします。 (Fig. 4)
・ 外したケーブル(コネクター)をすべて接続します。
・ OPERATION P.C.B. のアース(ST501)をアース線で
シャーシに接続してください。 (Fig. 4)
・ フラットケーブルを接続する際、極性に注意してく
ださい。
Power supply module
電源モジュール
Chassis
シャーシ
Rear panel
リアパネル
Loader mechanism unit
ローダーメカユニッ ト
BT-CARD P.C.B.
Fig. 4
MCR-B043/MCR-B043D/NS-BP83
Rubber sheet and the cloth
ゴムシー トと布
17