Table of Contents
Advertisement
Clear NVRAM
CAUTION: Clearing Micro DSLAM or MUM2000-2 NVRAM restores ALL system
and port configurations to original default settings including IP Address, Subnet
Mask and Gateway. Additionally, Inband Management will revert to its original
default setting (OFF) and you will be required to establish a direct connection with
your DSLAM for any subsequent configurations.
NVRAM cannot be cleared remotely via Telnet; your PC must be directly
connected to the Micro DSLAM or MUM2000-2 COM Port. Once the Clear
NVRAM command has been entered, the process will take approximately one [1]
minute to complete and you will be required to log back in for any subsequent
configurations.
Disable Telnet
Disallows remote DSLAM management with CLI (via Telnet).
Disable TFTP
Disables the option to download firmware upgrades, and to save system and port
configurations to local files.
Disable Web Server
Disallows DSLAM management via NMS.
Enable Telnet (Default)
Allows up to nine remote users to manage a DSLAM with CLI (via Telnet).
In order to remote manage a DSLAM via CLI, Inband Management must also be
enabled.
CLI-A2-GB20-00
[system name] ->clear_nvram
[system name] ->disable_telnet
[system name] ->disable_tftp
[system name] ->disable_web_server
[system name] ->enable_telnet
October 2004
3. CLI Commands
3-21
Advertisement
Table of Contents
