Table of Contents
Advertisement
3. CLI Commands
Independent Commands
The following CLI commands are used independently of the SET and SHOW
commands.
Allow
Specifies the IP Address(es) from which a DSLAM may be remotely managed.
DSLAMs are always manageable via a direct physical connection with the
MUM2000-2 or Micro DSLAM COM (Communication) port, regardless of
management IP Address specifications.
All IP Addresses (Default)
IP Address Range
Single IP Address
COM (Communication) Port Only
Each ALLOW command entered overwrites all previously entered ALLOW
commands.
3-20
[system name] ->ALLOW [ALL, ip_address or ip_address
ip_address]:
[system name] ->allow
OR
[system name] ->allow 0.0.0.0 - 255.255.255.255
[system name] ->allow [ip_address] - [ip_address]
Example: [system name] ->allow 193.166.254.1 -
193.166.254.254
[system name] ->allow [ip_address]
Example: [system name] ->allow
193.166.254.102
[system name] ->allow 0.0.0.0
October 2004
CLI-A2-GB20-00
Advertisement
Table of Contents
