Table of Contents
Advertisement
3. CLI Commands
Starting VLAN tag = 1-4085
Ending VLAN tag = Starting VLAN tag
VLAN Range / Trunk Port
A port set with one or more specified VLAN ranges will automatically be
designated as an 802.1Q VLAN Trunk Port; only packets tagged within the
specified VLAN range(s) will be allowed to communicate across that port. Up to 10
VLAN ranges may be specified per port on select Micro DSLAM and interface
module models.
A port configured with more than one single VLAN tag is considered a Trunk Port,
not an Access Port.
Starting VLAN tag = 1 - 4085
Starting VLAN tag < ending VLAN tag 4085
3-12
[system name] ->SET SLOT [ALL or 1-12 for the IPD12000, ALL or 1-4
for the IPD4000, 1 for the Micro DSLAM] PORT [ALL or port number]
VLAN_RANGE [1-10] [(1-4085) - (1-4085)]
Example: [system name] ->set slot 5 port 3 vlan_range 1 100-100
Packets
coming from
the . . .
With . . .
WAN
No VLAN tag
WAN
A VLAN tag within the
specified trunk port
range
WAN
A VLAN tag outside of
the trunk port range
Uplink
No VLAN tag
Uplink
A VLAN tag within the
specified trunk port
range
Uplink
A VLAN tag outside of
the trunk port range
[system name] ->SET SLOT [ALL or 1-12 for the IPD12000, ALL or 1-4
for the IPD4000, 1 for the Micro DSLAM] PORT [ALL or port number]
VLAN_RANGE [1-10] [(1-4085)-(1-4085)]
Example: [system name] ->set slot 5 port 3 vlan_range 1 100-250
October 2004
Will be . . .
Dropped
Transmitted; the packet will retain its
original VLAN tag, along with VLAN ID and
CFI bit. The original Priority, however,
will automatically be replaced with the
DSLAM port's current Priority configuration.
Dropped
Dropped
Transmitted as is; the packet will retain
its original tag configurations for VLAN ID,
Priority and CFI bit.
Dropped
CLI-A2-GB20-00
Advertisement
Table of Contents
