Save - Paradyne 6211 Command Manual

6211-I1 ADSL2+ Router Command Line Interface User's Guide
Examples
Add a route to the network 192.56.76.x via the br0 interface.
Add a route to gateway 10.6.33.129 for network 192.57.66.x.
Output
The output of the kernel routing table is organized in the following columns:
Destination
Gateway
Genmask
Flags
Files
/proc/net/route
/proc/net/rt_cache

save

Name
save Saves the current configuration to permanent storage on flash memory.
Synopsis
save
Description
The save command saves the current configuration to flash.
Examples
Save all current configuration to flash.
40
route add 192.56.76.0 255.255.255.0 br0
route add 192.57.66.0 255.255.255.0 10.6.33.129
The destination network or destination host.
The gateway address or "*" if none is set.
The netmask for the destination net, 255.255.255.255 for a host destination, and
0.0.0.0 for the default route.
Possible flags include:
U--route is up.
H--target is a host.
G--use gateway.
R--reinstate route for dynamic routing.
D--dynamically installed by daemon or redirect.
M--modified from routing daemon or redirect.
>save