Remoteaccess; Restoredefault - Paradyne 6211 Command Manual

6211-I1 ADSL2+ Router Command Line Interface User's Guide

remoteaccess

Name
remoteaccess Allows certain protocols to access the modem from the WAN side.
Synopsis
Usage: remoteaccess <enable|disable>
remoteaccess show
remoteaccess --help
Description
The remoteaccess command sets the security level to allow or disallow remote access into the route using
telnet, http, snmp, or ping from the WAN side. The options are enable, disable, and show.
Examples
Show the current remote access mode.
>remoteaccess show
Remote access is disabled.
Enable remote access.
> remoteaccess enable
Disable remote access.
>remoteaccess disable

restoredefault

Name
restoredefault Restores the modem configuration to factory defaults.
Synopsis
restoredefault
Description
The restoredefault command erases all configurations made by the user and restores the modem back to
the factory default configuration. Once this command is executed, the modem automatically reboots with
the default configuration.
Examples
Restore configuration to factory defaults.
>restoredefault
38