Dumpcfg - Paradyne 6211 Command Manual

dumpcfg

Name
dumpcfg Display the system's configuration.
Synopsis
dumpcfg
Description
The dumpcfg command displays the system's configuration, which is in text XML format.
Commands
None.
Options
None.
Examples
Display the system's configuration.
Dumpcfg
<psitree>
<SecCfg>
<srvCtrlList ftp="lan" http="lan" icmp="lan" snmp="lan" ssh="lan" telnet="lan"
tftp="lan"/>
</SecCfg>
<AtmCfg>
<initCfg structureId="2" threadPriority="25" freeCellQSize="10"
freePktQSize="200" freePktQBufSize
="1600" freePktQBufOffset="32" rxCellQSize="10" rxPktQSize="200"
txFifoPriority="64" aal5MaxSduLen
="64" aal2MaxSduLen="0"/>
</AtmCfg>
<AtmCfgTd>
<td1 cat="UBR" PCR="0" SCR="0" MBS="0"/>
</AtmCfgTd>
<SystemInfo>
<sysLog state="enable" displayLevel="ERR" logLevel="DEBUG" option="local"
serverIP="0.0.0.0" serve
rPort="514"/>
<snmp state="disable" readCommunity="public" writeCommunity="private"
sysName="Broadcom" sysLocati
on="unknown" sysContact="unknown" trapIP="0.0.0.0"/>
<sysUserName value="admin"/>
<protocol autoScan="enable" upnp="enable" macFilterPolicy="forward"
siproxd="enable"/>
</SystemInfo>
<WirelessCfg>
<vars state="enabled" hide="0" ssId="Broadcom" country="ALL" authMode="open"
radiusServerIP="0.0.0
.0" radiusServerPort="1812" radiusServerKey="" wep="disabled" keyBit="128-bit"
key64_1="" key64_2=
"" key64_3="" key64_4="" key64Index="1" key128_1="" key128_2="" key128_3=""
key128_4="" key128
Index="1" wpaRekey="0" wpakey="" wpa="tkip" fltMacMode="disabled" apMode="ap"
bridgeRestrict="d
isabled" wdsMAC_0="" wdsMAC_1="" wdsMAC_2="" wdsMAC_3="" apIsolation="off"
6211-I1 ADSL2+ Router Command Line Interface User's Guide
27