Sound Adjustments; Stereo/Sap Setup; Auto Sound Control - Zenith C27F43 Installation And Operating Manual, Warranty

Sound Adjustments

Stereo/SAP Broadcasts Setup
This TV can receive MTS stereo programs and any SAP (Secondary
Audio Program) that accompanies the stereo program; the system
transmits one additional sound signal as well as the original one. MTS
function doesn't operate in the video mode.
Using the mts Button
1. Use the mts button to select your desired MTS mode.
Each time you press this button, the
mode appear in turn.
2. Press the enter ( ) button.
A
Notes
• Stereo or SAP can only be received if the TV station transmits those
signals, even though you have selected
• Mono sound is automatically received if the broadcast is only in
Mono; even though
• Select if you want to listen to mono sound in remote fringe
areas during stereo/SAP broadcasting.

Auto Sound Control

You can enjoy the best sound without any special adjustment because
the TV set automatically adjusts the sound appropriate to the
program's character.
Using the dasp Button
1. Press the dasp button.
2. Use the dasp button to select
3. Press the enter ( ) button to remove menu.
A
Using the Audio Menu
1. Press the menu button and then use
menu shown to the right.
2. Press the G and then use the
F G
3. Use the / button to select
.
4. Press the menu button to remove menu.
,
or
or has been selected.
, , ,
D / button to select the
E
D button to select
E
/
, ,
17
, or
.
, or .
.
, , or
: