Available Features; Clock Setup; Off Timer Setup - Zenith C27F43 Installation And Operating Manual, Warranty

Available Features

Setting the Clock
Before using the on/off timer features, set the current time on the
clock.
Auto Clock Setup
The time is set automatically from a PBS broadcast signal. The PBS
channel signal includes information for the correct time and daylight
saving time.
1. Press the menu button and then use
menu shown to the right.
G
2. Press the and then use
G
3. Press the button and then use the
zone of your viewing area. Your choices are:
,
, and .
G
4. Press the button and then use the
channel. (A local PBS channel.)
5. Press the menu button to remove menu.
Manual Clock Setup
1. Press the menu button and then use
menu shown to the right.
G
2. Press the and then use
G
3. Press the button and then use the
G
4. Press the button and then use the
G
5. Press the button and then use the
minutes.
6. Press the menu button to remove menu.
Setting the Off Timer
Off Timer automatically switches the TV to standby mode at the preset
time.
1. Press the menu button and then use
menu shown to the right.
2. Press the G and then use
3. is used to activate or deactivate preset on/off times.
F G
Use the / button to select
4. Press the button.
E
G
5. Press the button and then use the
G
6. Press the button and then use the
minutes.
7. Press the menu button to remove menu.
Note
• If the same time is set for both on time and off time, only off time
operates.
D / button to select the
E
D / button to select
E
D / button to select the time
E
,
D / button to set a PBS
E
D / button to select the
E
D / button to select
E
D / button to select
E
D / button to set the hours.
E
D / E button to set the
D / E button to select the
D / button to select
E
or .
D / button to set the hours.
E
D / E button to set the
11
.
,
,
.
.
.
:
: