External Equipment Connections - Zenith C27F43 Installation And Operating Manual, Warranty

External Equipment Connections

You can connect additional equipment, such as VCRs, camcorders etc. to your TV.
Connection panels shown here may be somewhat different from your TV.
Here is an example drawing of a typical jackpack layout.
4
OUT
VIDEO (L/MONO) AUDIO
1
IN1
1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select
2. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select
3. IN 3 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select
4. OUT JACKS: Connect external equipment inputs (VCR, Audio amplifier) to these outputs for recording
or monitoring the selected program.
5. §/ EARPHONE JACK
Note: This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
Connecting AUDIO/VIDEO IN Jacks
1. Connect the audio/video output jacks from the VCR
to IN 1 or IN 2 (A/V) jacks on the TV.
If you connect the video jack only, you can't hear the
sound from the TV.
2. Use the TV/VIDEO button to select
.
Note: If you connect the audio/video output jacks from
the VCR to the IN 3 (A/V) jacks on the side of
the TV, select
3. Press the PLAY button on the VCR.
The video playback appears on the TV screen.
Note: If using a monaural VCR, connect the output jack from VCR to the AUDIO L/MONO IN jack on TV
so that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack on
TV, the sound is heard only from the right speaker.
COMPONENT
P P
Y
B R
DVD IN(480i)
(R)
VIDEO (L/MONO) AUDIO
2
IN2
or
.
24
5
(R)
3
.
.
.
OUT
VIDEO (L/MONO) AUDIO (R)
IN1
TV
Playback VCR
IN 3
IN 3
TV