Table of Contents
Advertisement
CONNECTIONS
FOR YOUR TV
STEP 5. TV CONNECTION
TO EXTERNAL
SPEAKERS
1.
Place the SPEAKERS switch on the back of the TV
in the INT position.
2.
Connect the two external speaker terminals.
Ob-
serve polarity of the connections; silver speaker
wire to the red terminal and copper speaker wire to
the black terminal. Use 8-ohm speakers only.
3.
Place the SPEAKERS switch on the back of the TV
in the EXT position.
4.
Use the VOLUME control on the TV or on the
remote control to adjust the volume of the external
speakers.
STEP 6. "rv CONNECTION
TO
SURROUND SOUND SPEAKERS
I.
Mount and connect the optional Surround Sound
speakers by following the instructions provided
with the speakers.
2. In the AUDIO Menu, set the TV to STEREO.
3. Use the SURROUND option in the AUDIO Menu
to adjust the volume of the surround speakers.
4. Use the VOLUME control to adjust the volume of
the TV.
5. The level of the Surround sound varies relative to
the difference between the left- and right-channel
stereo signals. The degree of the Surround sound
effect depends on the program source you are
using. Some sources, especially video tape, provide
greater sensation of Surround sound than may be
obtained from a standard TV broadcast.
NOTE: The surround jack is always active. Therefore, the
position of the speaker switch does not affect the operation
of surround speakers.
CAUTION: The Surround Sound output has an 8-ohm sys-
tem impedance.
It is for use with two 16-ohm speakers con-
nected in parallel. Use of non-surround
speakers may
damage your TV.
VIDEO 1 IN
©©
IS ohm
I
16 ohm
SURROUND SOUNO
SPEAKERS
8ok'n System
Impedance
©©
RIGHT
LEFT
TO EXTERNAL AMP
LOOPOUT
SPEAKERS
/U_'/C/UBLE 1
VIDEO
©
VIDEO 2 IN
R
L
S-VIDEOI IN
©©
S-VIOEO
R
D
Q
I-I
L
EXTERNAL SPKRS
Phono
P_
U
SURROUND
SPEAKER
i
.
SILVER
I1o_
li L
l
Left
8 ohm
Right
Speak_
Sohm
2s8o
1 - 7
Advertisement
Table of Contents
