Zenith C27F43 Installation And Operating Manual, Warranty page 25

Note: If the input jacks on the front panel and back panel are connected to external equipment at the
same time, the input jacks on the front panel have priority over the input jacks on the back panel of
the TV.
S-VHS VCR Connection
1. Connect the S-VHS output jack from the VCR to
the S-VIDEO jack on the side of the TV.
2. Connect the audio/video output jacks from the
VCR to the IN 3(A/V) jacks on the side of the TV.
3. Use the TV/VIDEO button to select
Note: If you connect the S-VHS/audio output jacks
from the VCR to the S-VIDEO jack and IN 1
or IN 2 audio jacks on the back of the TV,
select or
4. Press the PLAY button on the VCR.
Video playback is visible on the TV screen.
VCR Recording Setup for TV
Programs
1. Connect the audio/video input jacks from the
recording VCR to the OUT (A/V) jacks on the TV
connection panel.
2. Select the channel number on the TV.
3. Set the recording VCR to record.
VCR Recording Setup for a VCR
1. Connect the output jacks from the playback
VCR to the IN 1 or IN 2 (A/V) jacks on the back
of the TV (or IN 3 jacks on the side of the TV ).
2. Connect the input jacks from the recording VCR
to the OUT (A/V) jacks on the back of the TV.
3. Use the TV/VIDEO button to select
.
If you connect the VCR to the IN 3 (A/V) jacks
on the side of the TV, you should select
.
4. Press the PLAY button on the playback VCR
and set the recording VCR to record.
.
.
OUT
IN1
or
Playback VCR
25
Playback VCR
Recording VCR
VIDEO (L/MONO) AUDIO (R)
TV
Recording VCR
OUT
TV
VIDEO
IN1
IN 3
TV
(L/MONO) AUDIO (R)