Table of Contents
Advertisement
6 Select the network that you want to
connect with »V«, »Λ«, »<« or »>« and
confirm with »●«.
- Wireless connection password screen is
displayed.
7 Select the character with »V«, »Λ«, »<«
or »>« and move to the next character with
»●«.
– Select »ABC« for uppercase or
»abc« for lowercase and confirm with »●«.
– Select »?@123« for numbers or
symbols and confirm with »●«.
– To clean the characters, select » «
button and confirm with »●«.
– Enter the password and select
»Submit« with »V«, »Λ«, »<« or »>«
and confirm with »●«.
Note: In WEP encryption system, more
than one network password can be
assigned to the network. Your television
can connect the network only with the
password in level one. For TV to discover the wireless modem on the network, the
network name should support ASCII characters.
8 Select »Connect« with »« (red) button to establish the modem connection.
– »Connecting ... Please wait« message will be displayed.
9 Press »« (green) button to make sure that the network connection is established
with the current settings.
– »Testing ... Please wait« message will be displayed and if it is connected
successfully, »Connection to Gateway : Success«, »Internet Connection: Success«
message will be displayed.
10 Press »i« to end the setting.
Note: If you do not have a dynamic network, follow the instructions in manual
connection section.
5.3.8. Manual Wireless Network Connection
Certain networks require Static IP address. If your network requires a Static IP
address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS«
values manually. You can obtain your »IP Address«, »Netmask«, »Gateway« and
»DNS« values from your Internet Service Provider (ISP).
1 Open the menu with »i« button.
2 Select »NETWORK APPS« menu with »V« or »Λ« and confirm with »●«
– »NETWORK APPS« menu will be displayed.
3 Select »Connection Type« option with »V« or »Λ« and select »Wireless« with »<«
and »>«.
4 Go to »Select Access Point« option with »V« or »Λ« and confirm with »●«
– »Select Access Point« menu appears and available wireless networks are scanned
and displayed in the menu.
5 Select the network that you want to connect with »V«, »Λ«, »<« or »>« and confirm
with »●«.
30
September 2011
TP CHASSIS / TELEVISION
Advertisement
Table of Contents
